The M10 is designed for lab and production work. Its purpose is to provide a means for evaluating the ground continuity between a unit's chassis and the ground from the AC power-in cord. The M10 applies a 10 ampere current to the DUT for a duration of a time, preset from 1 second to 90 seconds. The DUT is plugged into front panel receptacle(or rear;special). The total resistance in the ground circuit is measured and displayed on the front panel of the continuity tester. Test limits for the total resistance are preset by the user via a rear panel control. When the DUT is defective, automatic circuitry turns off the current and meter, turns on fail lamp, and activates an audible alarm. This electronic shutdown circuit turns off the current within 2 ms after a fault.
** The HV interconnect cable (to the hipot) is not included with this unit. It is available for an additional fee, contact Sales for current pricing.
Operation Manual Power Cord High Current Ground Sense Cable
Your request to be notified when this product is back in stock has been sent to our sales department.
We will notify you as soon as this item is available for purchase.
Thank you for allowing us the opportunity to assist with your test equipment needs. We hope to earn your business.
Error Sending Request
We are very sorry but an error on the server is preventing your request from being processed.
Please contact us via email or toll free at (800) 673-4102 and we will be
happy to assist you with this request.
We would also greatly appreciate it if you could provide us with this error code:
999
Unable to Process Request
Your offer was received but we are unable to process it for the following reason: ???
Please correct the issue indicated and resubmit or contact us via email or toll free
at (800) 673-4102 and we will be happy to assist you with this request.
Offer
AccuSource Electronics is always happy to consider reasonable offers on our test instruments.
Please enter your offer below for consideration.
Rod-L M10
$.00
Contact Info
Requirements
Our normal service includes 90 day warranty, all standard accessories and manuals, and restoration to
"nearly new" condition. Discounts may be offered for reduced service levels. Please let us know which of
these you would be willing to consider for the price discount.
Reduced Warranty Period:
Do you require manuals and accessories for the instrument?
Will you accept an instrument with minor cosmetic and physical flaws if it operates properly?
Are you willing to prepay your order by check or wire transfer to avoid credit card fees?
Additional Info
Equipment Offer Sent
Your offer has been sent to our sales department for review. You should expect a response within
one business day or less.
Thank you for allowing us the opportunity to assist with your test equipment needs. We hope to earn your business.
Error Sending Request
We are very sorry but an error on the server is preventing your request from being processed.
Please contact us via email or toll free at (800) 673-4102 and we will be
happy to assist you with this request.
We would also greatly appreciate it if you could provide us with this error code:
999
Unable to Process Offer
Your offer was received but we are unable to process it for the following reason: ???
Please correct the issue indicated and resubmit or contact us via email or toll free
at (800) 673-4102 and we will be happy to assist you with this request.
Shipping Calculator
Please provide the requested information to receive an estimated shipping cost.
