The FG502 Function Generator Plug-In provides low distortion sine, square, triangle, positive and negative pulse and ramp waveforms. Frequency range from 0.1 Hz to 11 MHz. A voltage controlled frequency (VCF) controls the output frequency from an external source. A +2.5 V square wave trigger is available at the front panel and a variable DC offset of ±5 V is also provided. Designed to operate in a TM500-Series power module (not included). =============================================== It features:
Generated low distortion sine, square, triangle, positive and negative pulse, and ramp wave forms from 0.1 Hz to 11 MHz
Variable DC offset
square wave trigger is available at front panel
Voltage controlled frequency (VCF) input controls the output frequency from external voltage source. The output frequency can be swept above or below the selected frequency to a maximum of 1000:1 depending on the polarity and amplitude of the VCF input and the selected frequency
An external gate input allows the generator to operate for the duration of an externally applied gating signal. This mode provides either a single cycle output, or a train of preselected wave forms, depending on the gating signal width and the frequency setting.
Your request to be notified when this product is back in stock has been sent to our sales department.
We will notify you as soon as this item is available for purchase.
Thank you for allowing us the opportunity to assist with your test equipment needs. We hope to earn your business.
Error Sending Request
We are very sorry but an error on the server is preventing your request from being processed.
Please contact us via email or toll free at (800) 673-4102 and we will be
happy to assist you with this request.
We would also greatly appreciate it if you could provide us with this error code:
999
Unable to Process Request
Your offer was received but we are unable to process it for the following reason: ???
Please correct the issue indicated and resubmit or contact us via email or toll free
at (800) 673-4102 and we will be happy to assist you with this request.
Offer
AccuSource Electronics is always happy to consider reasonable offers on our test instruments.
Please enter your offer below for consideration.
Tektronix FG502
$.00
Contact Info
Requirements
Our normal service includes 90 day warranty, all standard accessories and manuals, and restoration to
"nearly new" condition. Discounts may be offered for reduced service levels. Please let us know which of
these you would be willing to consider for the price discount.
Reduced Warranty Period:
Do you require manuals and accessories for the instrument?
Will you accept an instrument with minor cosmetic and physical flaws if it operates properly?
Are you willing to prepay your order by check or wire transfer to avoid credit card fees?
Additional Info
Equipment Offer Sent
Your offer has been sent to our sales department for review. You should expect a response within
one business day or less.
Thank you for allowing us the opportunity to assist with your test equipment needs. We hope to earn your business.
Error Sending Request
We are very sorry but an error on the server is preventing your request from being processed.
Please contact us via email or toll free at (800) 673-4102 and we will be
happy to assist you with this request.
We would also greatly appreciate it if you could provide us with this error code:
999
Unable to Process Offer
Your offer was received but we are unable to process it for the following reason: ???
Please correct the issue indicated and resubmit or contact us via email or toll free
at (800) 673-4102 and we will be happy to assist you with this request.
Shipping Calculator
Please provide the requested information to receive an estimated shipping cost.
In