Chart Recorder | |
Recording method | Direct thermal |
Chart size | 140mm W x 139mm L (5.5" W x 5.47" L); Z-fold, 300 sheets, 200 feet |
Resolution | 12 dpm (300dpi) amplitude and time axis |
Chart speed | 1 mm/hr to 100 mm/sec |
Remote start/stop | TTL level or switch closure |
Maximum waveform size | 128 mm |
Amplitude grids | 6 independent grids up to 125 mm wide;grid placement automatic or user-defined |
Time marking | Tri-state (x1, x10, x100) mark on either chart edge; grid timelines can be syncronized to time mark; selectable time mark reference (0.02 to 1 sec) |
Annotation | System log printed automatically (time, date, speed); each grid hasoneline of text (128 ASCII characters); an on-demand text buffer available (128 characters) |
Signal conditioner | Auto-annotation using end-of-grid text buffer |
Channel ID | Each channel labeled with channel number;top and bottom grid values can be annotated |
Data Capture | |
Media | Sample direct to disk (non-volatile) |
Sample rate | 0.0167 Hz (once per minute) to 50 kHz per channel |
Disk capacity | 2 billion samples, 1000 records |
Time stamp | Time and date automatically saved with data |
Header | Information on units, range, sample rates, etc., saved with data |
Events | All events can be captured with waveforms |
Trigger point location | Pre- and Post-trigger percentage, user adjustable |
Auto-arm | Automatic stacking of captures |
Dual sample rate | Independent control over pre- and post-trigger sample rates |
Auto playback and re-arm | yes |
Data Logger | |
Data Logger | Numerical printout of waveform data in user-specified engineering units: up to 2 lines per second |
Digital Signal Processing | |
Sample rate | 50 khz |
ADC resolution | 14-bit |
Functions | Filter, RMS |
Filter choices | Low pass with stops from 1 Hz to 1000 Hz; High pass with starts from 0.1 Hz to 100 Hz, 50/60 Hz notch |
Math Channels | Addition, subtraction, multiplication, division, root mean square (rms), integration, differentiation with filter, true power, apparent power, power factor |
Event Inputs | |
Number of inputs | 8 external event markers |
Input type | TTL with pull-ups, 0V to 5V, 0.2 msec duration |
Front Panel Display | |
Type | Active matrix color LCD |
Viewing area | 10.4" (diagonal); resolution: 640 x 480 |
Functions | control menus, waveform review |
Miscellaneous input/output | |
Operation Manual
Quick Reference Manual AstroVIEW Software Astroset Software Power Cord Pack Chart Paper Zip Drive Disk 6 Pin Terminal Block Plugs DB15 Connector Carry Bag Crossed Ethernet Cable cat-5 Contact InfoPlease let us know how we can contact you.Additional InfoIn-Stock Notification Request SentYour request to be notified when this product is back in stock has been sent to our sales department. We will notify you as soon as this item is available for purchase.Thank you for allowing us the opportunity to assist with your test equipment needs. We hope to earn your business. Error Sending RequestWe are very sorry but an error on the server is preventing your request from being processed.Please contact us via email or toll free at (800) 673-4102 and we will be happy to assist you with this request. We would also greatly appreciate it if you could provide us with this error code: 999 Unable to Process RequestYour offer was received but we are unable to process it for the following reason:??? Please correct the issue indicated and resubmit or contact us via email or toll free at (800) 673-4102 and we will be happy to assist you with this request. OfferAccuSource Electronics is always happy to consider reasonable offers on our test instruments. Please enter your offer below for consideration.Astro-Med DASH4U
$
.00
Contact InfoRequirementsOur normal service includes 90 day warranty, all standard accessories and manuals, and restoration to "nearly new" condition. Discounts may be offered for reduced service levels. Please let us know which of these you would be willing to consider for the price discount.Reduced Warranty Period: Do you require manuals and accessories for the instrument? Will you accept an instrument with minor cosmetic and physical flaws if it operates properly? Are you willing to prepay your order by check or wire transfer to avoid credit card fees? Additional InfoEquipment Offer SentYour offer has been sent to our sales department for review. You should expect a response within one business day or less.Thank you for allowing us the opportunity to assist with your test equipment needs. We hope to earn your business. Error Sending RequestWe are very sorry but an error on the server is preventing your request from being processed.Please contact us via email or toll free at (800) 673-4102 and we will be happy to assist you with this request. We would also greatly appreciate it if you could provide us with this error code: 999 Unable to Process OfferYour offer was received but we are unable to process it for the following reason:??? Please correct the issue indicated and resubmit or contact us via email or toll free at (800) 673-4102 and we will be happy to assist you with this request. |