The M25 is designed for lab and production work. Its purpose is to provide a means for evaluating the ground continuity between a unit's chassis and the ground from the AC power-in cord. The M25 applies a 25 ampere current to the DUT for a duration of a time, preset from 1 second to 90 seconds. The DUT is plugged into front panel receptacle(or rear;special). The total resistance in the ground circuit is measured and displayed on the front panel of the continuity tester. Test limits for the total resistance are preset by the user via a rear panel control. When the DUT is defective, automatic circuitry turns off the current and meter, turns on fail lamp, and activates an audible alarm. This electronic shutdown circuit turns off the current within 2 ms after a fault.
** The HV interconnect cable (to the hipot) is not included with this unit. It is available for an additional fee, contact Sales for current pricing.
Item | Description | Price | |
---|---|---|---|
Rod-L M100DC-5.5-100 | Rod-L M100DC-5.5-100, 0 - 5KV, 0 - 1mA, DC Hipot Tester | $495.00 |
Rod-L M25