Call Us : (800) 673-4102

TTC Fireberd 6000A

TTC Fireberd 6000A - Communications analyzer mainframe. Interface cards sold separately.
  • TTC Fireberd 6000A for sale
Mouse move on Image to zoom

Datasheets

$995.00 In Stock! 

Model: TTC Fireberd 6000A     Condition: Reconditioned

    • Test ATM, frame relay, ISDN, low-speed data, T1, 2M, T3, and 34M with the same instrument, and recall up to ten of your most frequently used test setups with the push of a button.
    • Detect hard-to-find bit error rate (BER) problems quickly, and interpret test results easily using custom printouts showing only the results that you specify.
    • Reduce response time and extend the reach of your field technician with remote testing. DTM32 and Remote Test Manager (RTM) software options enable you to perform remote testing from your PC or UNIX workstation.
    • Use the FIREBERD 6000 to test analog circuits. The TIMS-45 Lid enables you to perform VF and wideband Transmission Impairment Measurement Set (TIMS) tests on analog and digital transmission lines.
    • Automate routine testing on your FIREBERD 6000 with the Dynamic Script Generator Option and free LabVIEW drivers.
    • In-service monitoring - Monitor live data at various access locations, from resistor-isolated DSX monitor points to a bridge on a four-wire access point, without disturbing revenue-generating traffic. Ideal for routine maintenance, the FIREBERD 6000 offers a variety of in-service measurements, including bipolar violations, timing and level analysis, frame errors, and CRC errors.
    • End-to-end testing - Quickly isolate any problem to a specific direction by analyzing the performance of an entire digital link in both directions. Full-duplex end-to-end testing also serves as an excellent analysis of all of the circuits and equipment within your network.
    • Out-of-service testing - Perform precise analysis of your circuits and equipment by removing live traffic from the digital link. The FIREBERD 6000 offers a variety of bit error results and statistics for the most accurate measurement of circuit performance by any test instrument. The FIREBERD 6000 can generate an array of stress patterns, frame relay frames, and ATM test cells to ensure that your circuits and equipment are operating within the limits of applicable standards and to verify an acceptable Quality of Service (QoS) for your circuit.
    • Loopback testing - Enjoy the convenience of using a single FIREBERD 6000 to perform out-of-service testing. Loopback testing is ideal as a quick check of circuit performance or when isolating faulty equipment. The FIREBERD 6000 supports all standard T1, DDS, and data communications loopbacks.
    • Portable WAN analyzer with automated and remote testing.
    • Easy-to-use, menu-driven user interface
    • Test ATM, frame relay, ISDN, T1, and more.
    • Detect hard-to-find BER problems quickly
    • Fast packet testing.
    • ISDN testing.
    • T- and E-carrier testing.
  • DTE/DCE datacomm testing.

Operation Manual (QR Link)
Quick Reference Guide (QR Link)
Service Manual (QR Link)
Power Cord
Front Cover (installed)
Accessory Pouch (installed)
Interface Blank Off Plate (installed)
Firmware Blank Off Plate (installed)
Item Description
TTC 30678 TTC 30678 DDS DSOA/B Interface adaptor for fireberd communication analyzers.
TTC 30678A TTC 30678A DDS DSOA/B Interface adaptor for fireberd communication analyzers.
TTC 40200 TTC 40200 RS449 DTE/DCE Interface Adaptor for fireberd communication analyzers.
TTC 40236 TTC 40236 - RS232 DTE/DCE Interface Adaptor for fireberd communication analyzers.
TTC 40263 TTC 40263 RS449 DTE Interface Adaptor for firebird communication analyzers.
TTC 40460 TTC 40460 DS1/D4/Fe interface card for Fireberd test sets.
TTC 40540 TTC 40540 DS1/T1/D4/ESF/SLC-96 interface card for Fireberd test sets.
TTC 40849 TTC 40849 - T1 channel monitor lid for T-Berd 209A and 211 test sets.
TTC 41084 TTC 41084 Repeater power supply. Works with T-Berd 209A, 211, or stand alone.
TTC 41131A TTC 41131A DDS local loop Interface adaptor for fireberd communication analyzers.
TTC 41400 TTC 41400 - RS-449/mil-188/EIA-530 interface adaptor for fireberd analyzer.
TTC 41440 TTC 41440 T1 / FT1 Interface adaptor for Fireberd analyzers.
TTC 41440A TTC 41440A T1 / FT1 Interface adaptor for Fireberd analyzers.
TTC 41754 TTC 41754 T1 Repeater adaptor for T-Berd test sets.
TTC 41800 TTC 41800 E1 CCITT 2.048M/Nx64 kbps D/I Interface adaptor for Fireberd analyzers.
TTC 41900 TTC 41900 - Test Access interface adaptor for fireberd analyzer.
TTC 41945 TTC 41945 DS3 Interface adaptor for fireberd communication analyzers
TTC 42170 TTC 42170 - DLC Analyzer lid for T-Berd 209A / 211.
TTC 42522 TTC 42522 - V.35 / RS-449 / X.21 Interface Adaptor for Fireberd communication analyzers.
TTC 43275 TTC 43275 - ISDN / DDS Analyzer lid for T-Berd 209OSP.
TTC 43440 TTC 43440 DS3/DS1/ATM interface for Fireberd test sets.
TTC ISU 6000 TTC ISU 6000 - Interface Switching Unit. ISU6000 Allows up to four interface cards to be used with the Fireberd 6000 or 6000A.
TTC PR-40A TTC PR40A - Thermal printer for TTC / Acterna test sets.
TTC 40234 TTC 40234 RS232 Asyncy Character Interface Adaptor for fireberd communication analyzers.
TTC Option PR-45 TTC PR-45 - Thermal printer option in front cover for Fireberd 4000 or 6000A.
TTC 40405 TTC 40405 - DS1 / T1 (D4 Framing) Interface adaptor for Fireberd analyzers.
TTC 43141 TTC 43141 - Repeater Power Supply Multiplexer
TTC RM6000A - 6000A Rackmount TTC 6000A Rackmount for Fireberd 6000A in lieu of front cover / handle.
TTC 42219A TTC 42219A - HSSI Interface for Fireberd
TTC 40204 TTC 40204 Lab interface module for Fireberd
TTC 41131B TTC 41131B DDS local loop Interface adaptor for fireberd communication analyzers.
TTC 40202 TTC 40202 V.35-306 DTE/DCE Interface Adaptor
TTC 31650 TTC 31650 - 2M/34M ATM Interface Adaptor
TTC PR-35 TTC PR-35 Rack Mount Printer
TTC 41131 TTC 41131 DDS local loop Interface adaptor for fireberd communication analyzers.
TTC 30481 TTC 30481 DSO/DSOA Interface Adaptor for fireberd communication analyzers.
TTC 40676 TTC 40676 Dual Cable Interface Adaptor
TTC 42219 TTC 42219 - HSSI Interface for Fireberd
TTC 40298 TTC 40298 Mil-188-114 Balanced Interface Adaptor
TTC 40226 TTC 40226 Mil-188C/ MIL-188-114 Unbalanced Interface Adaptor
TTC TIMS-45 TTC IMS45 Lid Option *** NEW IN BOX***
TTC 30524 TTC 30524 - G.703 8.448 Mbps Interface Adaptor
TTC 42242 TTC 42242 - Diphase Interface Adaptor
TTC 40180 TTC 40180 RS-449 Interface Adapter
TTC 40112 TTC 40112 RS-232 Interface Adpater
TTC 40151 TTC 40151 DS1 Interface Adapter
TTC 40392 TTC 40392 RS-232-C/V.24/MIL 188C Character Interface Adapter
TTC 30609 TTC 30609 - 2048 kb/s G.704 Framing Interface
TTC 30608 TTC 30608 - CCITT G.703 64 kb/s Interface Adapter
TTC 10770 TTC 10770 Interface Extender for Fireberd Analyzers. Allows front panel interface access.
TTC 31910 TTC 31910 - High Speed TTL Interface for Fireberd Communications Analyzers
Item Description Price
TTC 6001 TTC Option 6001 DS1 wideband jitter measuremtent option for Fireberd 6000A. $49.00
TTC 6002 TTC Option 6002 DS1 jitter spectral analysis option for Fireberd 6000A. $95.00
TTC 6003 TTC Option 6003 DS1 jitter generation option for Fireberd 6000A. $69.00
TTC 6004 TTC Option 6004 Clock Recovery (50 bps to 520kbps) option for Fireberd 6000A. $150.00
TTC 6006 TTC Option 6006 precision timebase option for Fireberd 6000A. $89.00
TTC 6007 TTC Option 6007 G.703 Wideband Jitter Measurement and Generation $335.00
TTC 6008 TTC Option 6008 G.703 Jitter Spectral Analysis $435.00
TTC 6009 TTC Option 6009 ANSI T1.403 PRMs $435.00
TTC 6011 / 6010 TTC Option 6010 frame relay option for Fireberd 6000A. $295.00
TTC 6005 TTC Option 6005 IEEE 488 Interface for Fireberd 6000A. $595.00

Similar Products

Contact Info

Please let us know how we can contact you.

Additional Info


In-Stock Notification Request Sent

Your request to be notified when this product is back in stock has been sent to our sales department. We will notify you as soon as this item is available for purchase.

Thank you for allowing us the opportunity to assist with your test equipment needs. We hope to earn your business.

Error Sending Request

We are very sorry but an error on the server is preventing your request from being processed.

Please contact us via email or toll free at (800) 673-4102 and we will be happy to assist you with this request.

We would also greatly appreciate it if you could provide us with this error code: 999

Unable to Process Request

Your offer was received but we are unable to process it for the following reason:
???

Please correct the issue indicated and resubmit or contact us via email or toll free at (800) 673-4102 and we will be happy to assist you with this request.

Offer

AccuSource Electronics is always happy to consider reasonable offers on our test instruments. Please enter your offer below for consideration.

TTC Fireberd 6000A

$ .00

Contact Info

Requirements

Our normal service includes 90 day warranty, all standard accessories and manuals, and restoration to "nearly new" condition. Discounts may be offered for reduced service levels. Please let us know which of these you would be willing to consider for the price discount.

Reduced Warranty Period:
Do you require manuals and accessories for the instrument?
Will you accept an instrument with minor cosmetic and physical flaws if it operates properly?

Are you willing to prepay your order by check or wire transfer to avoid credit card fees?

Additional Info


Equipment Offer Sent

Your offer has been sent to our sales department for review. You should expect a response within one business day or less.

Thank you for allowing us the opportunity to assist with your test equipment needs. We hope to earn your business.

Error Sending Request

We are very sorry but an error on the server is preventing your request from being processed.

Please contact us via email or toll free at (800) 673-4102 and we will be happy to assist you with this request.

We would also greatly appreciate it if you could provide us with this error code: 999

Unable to Process Offer

Your offer was received but we are unable to process it for the following reason:
???

Please correct the issue indicated and resubmit or contact us via email or toll free at (800) 673-4102 and we will be happy to assist you with this request.