Call Us : (800) 673-4102
Spellman's SL Series of high voltage power supplies are designed to meet uncompromising performance standards in a minimum of space. Their circuitry includes a resonant high frequency inverter with proprietary control which provides fault-free operation in extreme transient and arcing environments with greater than 85% efficiency. These full featured supplies are available in a wide range of outputs with many options.
SPECIFICATIONS
Status Indicators:
Voltage and Current Control Mode, Interlock Open and Closed, High Voltage Inhibit, Overcurrent and Overvoltage, Arc, Regulation Error, Overtemperature, Over Power (Optional).
Input:
115Vac
Output:
0 - +40KV.
Front Panel Controls:
Voltage and current are continuously adjustable by ten-turn potentiometers with lockable counting dials, ON/OFF circuit breaker/lamp, high voltage ON switch/indicator and high voltage OFF switch/indicator.
Voltage Regulation:
Load: 0.005% of maximum voltage for full load change.
Line: ±0.005% of maximum voltage for a ±10% input line change.
Current Regulation:
Load: 0.01% of maximum current ±100µA for full voltage change.
Line: ±0.005% of maximum current for a ±10% input line change.
Ripple:
0.1% p-p of maximum output.
Temperature Coefficient:
100ppm/°C voltage or current regulated. Higher stability is available on special order.
Ambient Temperature:
Operating: 0°C to 50°C.
Storage: -40°C to 85°C.
Stability:
100ppm/hour after 1/2 hour warm-up for both voltage and current regulation.
Metering:
Digital voltage and current meters, 3
1 /2 digit ±1 least significant digit.Output Cable:
shielded high voltage cable removable at the rear panel.
AC Line Input Cable:
3-conductor, 12AWG, 6¿ (1.83m) cable permanently attached to unit.
Spellman SL40P600
