Rod-L M120DC

Production/Quality Assurance Testing

• Fully automatic test cycle
• Detects and indicates the following
  • Test Ready (security ground chassis sensed)
  • Test in Progress
  • Test Passed
  • Test Failed
• Following test parameters easily preset via rear panel potentiometers
  • Voltage ramp
  • Test time
  • Test voltage
  • overcurrent trip point
• Switch-selectable ramp and rest time combinations
• Arc detection circuit
• Overcurrent detection circuit
• Solid state HV generation and control system for reliability
• Switchable ¿burn¿ featured permits destructive testing by maintaining output voltage, following failure, to the DUT throughout duration of preset test time
• Can be interconnected with M25 Ground Continuity Test Instrument or any ROD-L AC Hipot Test Instrument to simplify multiple testing requirements

Continuos Ground Continuity Monitoring

• Monitors Ground Continuity of DUT before and during each Hipot Test
• Senses for 0.5 ohm (standard), at approximately 1.5 VAC
• Loss of safety ground connection during test causes high voltage to shut down with both audible and visual failure indication
• Inhibits application of high voltage if the security chassis ground is not secure

Superior Safety Features

• Front panel receptacle is rated to 8000 VAC
• Front panel receptacle prevents direct operator exposure to high voltage during test
• Shutdown within 2 milliseconds after dielectric breakdown, overcurrent or ground continuity fault
• Electronically controlled output voltage ramp rate circuit guarantees consistently smooth ramp
  Visual (audible optional) indication of high voltage applied to DUT
  Discharge circuit provides for rapid discharge of DUT following shutdown
  Visual and audible indication of the following:
  • Arc detection
  • Excessive overcurrent flow
  • Ground continuity test failure