Associated Research 3565D

KEY FEATURES & BENEFITS OF HYPOT II

• No load setup of trip current and output voltage.
  This provides the operator with an easy and safe way to set trip currents and output voltages since parameters are set without the high voltage activated.
• Automatic storage of test program.
  Hypot II powers up with the parameters that were used during the last test to avoid operator set-up errors.
• All parameters for the setups can be adjusted through a simple menu driven program.
  The easy to follow setup screens ensure that the operator correctly sets up all test parameters.
• Tamper proof front panel controls.
  This makes it possible to limit user access to the setup screens so that only authorized personnel with a security code can change test parameters.
• Line and load regulation.
  This system maintains the output voltage to within 1% from no load to full load and over the line voltage range to ensure that test results remain consistent and within safety agency requirements.
• The LCD display allows monitoring of current down to 100 microamps AC and 20 microamps DC.
  This allows the Hypot II to be used even when test requirements only allow a very low level of acceptable leakage current.
• Electronic dwell settings.
  The electronic dwell control helps keep test results consistent by ensuring that the test duration is the same for each product tested.
• PLC remote inputs and outputs.
  The standard 9 pin interfaces provide outputs for Pass, Fail, and Test in Process. Inputs include Test and Reset. This gives the user all the basic remotes required to configure the Hypot II through simple PLC relay control.
• Front panel LCD displays test parameters and results.
  A front panel LCD allows the operator to monitor the test. The display holds the results after a test item failure so that the operator can easily review the test results. Indications of high fail and continuity failure are clearly displayed.
• Maximum output current 12 milliamps AC and 5 milliamps DC.
  This makes this instrument a true hipot tester with enough output current to test capacitive loads in AC mode and allows the instrument to comply with the UL "120 Kohm" requirements.