Tektronix SG5030

Programmable leveled sinewave generator for oscilloscope calibration. Includes leveling head.

The SG 5030 is the only choice for anyone who needs leveled output amplitude to calibrate analog or digital scopes with bandwidth to 550 MHz under either local or programmable control. That¿s because no other programmable leveled sine wave generator is built specifically to fill scope calibration requirements. The SG 5030 leveled output is variable from 0.1 Hz to 550 MHz with a reference frequency of 50 kHz. Crystal-controlled frequency accuracy eliminates drift so there's no second-guessing results.

Accurately calibrated output voltage is provided from 4.5 mV to 5.5 V peak-topeak into 50 Ohms. Absolute amplitude accuracy is ±1.5% from 0.1 Hz to 50 kHz, with flatness from ±1.5 to ±4% over the remainder of the frequency range to 550 MHz.

A remote leveling head is standard and plugs directly into the oscilloscope to ensure that the output signal is level at all times. All other signal generators are spec'd at the front-panel BNC connector, not at the end of the cable going to the instrument under test.

• 0.1 Hz to 550 MHz frequency range with a reference frequency of 50 kHz
•  4.5 mV to 5.5 V amplitude range
• Amplitude flatness from ±1.5 to ±4% of 50 kHz reference
• Synthesized frequency accuracy
• Excellent VSWR
• 20 stored front-panel settings capability with non-volatile memory
• Self-test on power-up
• Easy integration into GPIB systems
• Companion to CG 5011 Programmable Calibration Generator