vLoc Pro2

The Vivax-Metrotech vLocPro 2 builds on the features of the original vLoc Pro to enhance productive locating. This represents a totally new generation of Pipe & Cable locator utilizing the latest technology including Dual Core DSP Processing and high performance Air Cored collocated antennas. These technologies give the operator the most accurate results possible in locating underground services giving reduced interference in congested and noisy areas, while still providing a simple to operate instrument.

Operational features Receiver

• Signal strength via moving bar graph & numeric values
• Peak, Null, Broad peak, sonde modes
• Left/right indication arrows
• Depth and Current measurement
• Current Direction Compass
• Gain Level control 140dB
• Battery indicator
• Frequency range selection 50 Hz to 83 kHz available
• Semi auto range control
• Configured in 640Hz, 8, 33, 65 and 83 kHz as standard
• Automatic filtering of irrelevant signals
• Locate pinpointing accuracy less than 5% to 3 metres on undistorted signal

Housing construction and features

• Carbon fibre antenna tube
• ABS thermoplastic housings
• IP54 weather proof housing
• -20°C to 50°C operating range
• TFT LCD 8.9cm colour VGA Screen
• 2 x Horizontal 3 x Vertical collocated antennas – Air cored
• Interchangeable Rechargeable Li-ION & alkaline battery packs
• Up to 4X the battery life of the original vLoc Pro
• 2 x USB ports for upgrade accessories and logging modes

Operational Features Transmitter

• Monochrome Dot matrix display
• Output current displayed
• Connection method displayed
• High Voltage warning
• Built in multimeter with Volts Ohms display
• Battery condition
• Induction mode
• Direct connection mode
• 640Hz, 8, 33, 65, 83 kHz
• Other frequencies available upon request
• Maximum output 50 volts
• Maximum output 1 amp
• Frequencies under 45kHz 10 watts
• Frequencies over 45kHz 1 watt

Housing construction and features

• High Impact Plastic
• Modular removable battery packs
• Standard packs using 12 D alkaline
• Rechargeable Ni-Mh packs (option)
• Battery life Alkaline Ni-Mh 
1 watt 8 hours or above 
5 watt 6 hours or above 
10 watt 5 hours or above
• 3 pin XLR input
• Output protected from accidental connection to 240 volts
• Direct connection leads & ground stake
• Induction clamp
• Separate ground lead 10 metres
• Operating temps ‰-20°C to 50°C