Requires 200-240V Three Phase AC input power. 50/60 Hz.
The DHP family provides models ranging in output power from 5 kW to 20 kW in a single chassis. Programmable output voltages range from 5V to 50 VDC, delivering up to 3,000 amperes. This family has two operational modes, constant-voltage and constant-current.
The DHP family uses control technology that allows 9 auto sequence steps, each step can be up to 99,999 seconds in duration. Combining all the steps allows a maximum auto-step program 27.7 hours long. Various voltages, currents and durations can be programmed for each step.
Unique Controls and Commands
-
Power-Off Memory: Enabling the input power and pushing the LAST SET button will restore the supply settings
-
External Shutdown: An external shut down to inhibit the output
-
Up/down arrows control voltages, step changes and current
Digital Displays
-
Power supply rating
-
Output power, voltage and current
-
All power, voltage and current set points and limits
-
Present and highest AC input voltage
-
Present and highest air inlet temperature
-
Power and auto-step sequence settings
-
Calibration set-up
-
Remote operation set-up
-
Diagnostics fault status summary
Protection and Safety
-
Safe Power-Up: In the local mode, the output is disabled for additional safety at power up
-
Front Panel Lockout: Most front panel controls are disabled when operated remotely
-
Overvoltage, over-temperature, surge limit, soft start, brown out and short circuit protection current limit fold back.
Please contact our sales department for more information.
