Requires 480V Three Phase AC input power. 50/60 Hz.
The DHP family provides models ranging in output power from 5 kW to 20 kW in a single chassis. Programmable output voltages range from 5V to 50 VDC, delivering up to 3,000 amperes. This family has two operational modes, constant-voltage and constant-current.
The DHP family uses control technology that allows 9 auto sequence steps, each step can be up to 99,999 seconds in duration. Combining all the steps allows a maximum auto-step program 27.7 hours long. Various voltages, currents and durations can be programmed for each step.
Unique Controls and Commands
-
Power-Off Memory: Enabling the input power and pushing the LAST SET button will restore the supply settings
-
External Shutdown: An external shut down to inhibit the output
-
Up/down arrows control voltages, step changes and current
Digital Displays
-
Power supply rating
-
Output power, voltage and current
-
All power, voltage and current set points and limits
-
Present and highest AC input voltage
-
Present and highest air inlet temperature
-
Power and auto-step sequence settings
-
Calibration set-up
-
Remote operation set-up
-
Diagnostics fault status summary
Protection and Safety
-
Safe Power-Up: In the local mode, the output is disabled for additional safety at power up
-
Front Panel Lockout: Most front panel controls are disabled when operated remotely
-
Overvoltage, over-temperature, surge limit, soft start, brown out and short circuit protection current limit fold back.
** NOTE ** - This item may require palletized shipping. Contact Sales for details.
Palletized shipments will not calculate properly during online checkout.
Clients may proceed with online orders and our Sales staff will contact you regarding
the shipping details.
Operation Manual
Programming Manual
25 pin Programming Connector with Jumper (installed)
AC Input Cover (installed)
