Sorensen DCS600-1.7

DCS Series power supplies are 1000W supplies designed to provide highly stable, continuously variable output voltage and current for a broad range of development, system and burn-in applications.  The DCS Series employs high frequency switching regulator technology to achieve high power density and small package size.

The DCS Series supply has two basic operating modes: Constant Voltage and Constant Current. In constant voltage mode the output voltage is regulated at the selected value while the output current varies with the load requirements. In constant current mode the output current is regulated at the selected value while output the voltage varies with the load requirements.

An automatic crossover system enables the unit to switch operating modes in response to varying load requirements. If, for example, the unit is operating in voltage mode and the load current attempts to increase above the setting of the current control, the unit will switch automatically from voltage mode to current mode. If the load current is subsequently reduced below the setting of the current control the unit will return to voltage mode automatically.

Features:

• Nine models with voltage ranges from O-8Vdc to O-600Vdc and current outputs from 1.7A to 125A.
• 115 / 230Vac selectable input voltage, 47-63 Hz single phase.
• Simultaneous digital display of both voltage and current.
• Ten turn potentiometer voltage and current controls permit high resolution setting of the output voltage and current from zero to the rated output.
• Automatic mode crossover into current or voltage mode.
• Flexible output configuration: multiple units can be connected in parallel or series to provide increased current or voltage.
• High frequency switching technology allows high power density, providing increased power output in a small, light package.
• Remote sensing to compensate for losses in power leads up to 1v / Lead (0.5V / lead for DCS 8-125 model).
• Adjustable Over-Voltage Protection (OVP)
• External TTL, AC or DC shutdown
• Remote voltage, current limit and OVP programming with selectable programming constants