Call Us : (800) 673-4102
Requires three phase 190-250 VAC input power, however it can be operated using single phase 200-250 VAC with slightly reduced (2500W) output capacity.
The DCS Family of 1 kW, 1.2 kW and 3 kW programmable power supplies utilizes unique packaging techniques to achieve continuous full output power (1 kW, 1.2 kW or 3 kW) in any volt/amp combination within the rated output voltage and current limits in a low profile chassis., Demonstrated large installed base over a long period of time, the DCS family provides a highly reliable power platform.
This family has an easy-to-use front panel with 10-turn potentiometers to adjust voltage and current settings that are displayed simultaneously. LEDs indicate overtemperature, remote programming, shutdown and over voltage protection, status and constant-voltage/current mode operation. The DCS 3 kW Models have push button control of the output standby mode, OVP reset, remote/local programming and preview status of voltage, current and OVP setpoints.
| Meter Accuracy | 1% of full scale + 1 count |
| Max. Voltage Differential from Output to Safety Ground | 150 VDC |
| Remote Start/Stop and Interlock | TTL compatible input or 12-250 VAC (12-130 VDC) or a contact closure |
| Cooling | Internal fan, over temperature shutdown if internal heat sink exceeds set temperature |
| Remote Sense | The maximum allowed sense line drop is 4V per line (2V on the DCS 8/10V 1 kW/1.2 kW models and 1V/line for all 3 kW models). Line drop subtracts from the maximum available output voltage at full rated power. |
| Remote Programming | Enabled via external jumper on rear panel connector J3 |
| Overvoltage Protection | Crowbar type adjustable from 5-110% of rated output using front panel control (local or remote program selectable via J3 jumper) |
| Remote Analog Programming Linearity | ±1% Accuracy: ±5% |
| Regulatory | Certified to UL/CSA 61010 and IEC/EN 61010-1 CE Compliant (LVD and EMC directive) |
Sorensen DCS40-75E
