Mountain Engineering & Technology ME-1002

• Simulates #22AWG (0.7mm) PIC/ABAM unshielded twisted-pair (UTP) and 75W coaxial transmission line

• Selectable line length for DSX-1/E1 pulse mask testing: 131, 262, 393, 524, and 655 feet

• Selectable attenuations from 0dB to -18dB for input sensitivity testing

• Simulates over 1200m of 75W coax in 40m increments

• Dedicated 50W oscilloscope signal output

• Smart Trigger^TM output for stable viewing of both positive and negative data pulses

• Remote control of all functions via standard RS-232 port

• Accepts Bantam, 310 , RJ-48 and coaxial connectors

Compatibility

• US and European AMI-PCM codes

DSX-1/T1	-	1.544Mb/s
DS1C/T1C	-	3.152Mb/s
DS2/T2	-	6.312Mb/s
CEPT/E1	-	2.048Mb/s
CEPT	-	8.448Mb/s

• ISDN primary rate standards, 1.544Mb/s and 2.048Mb/s

• Manchester coded data from 100kb/s to 10Mb/s

• Facilitates fast, easy, and accurate ANSI/CCITT pulse mask testing

• Enhances design, test, and troubleshooting productivity by eliminating spools of wire and patch panels

• Allows automated testing of office repeaters, DSX channel banks, and other telecom equipment

General Description

The ME-1002 simulates three types of transmission line commonly used in short distance, interoffice digital telephone systems: 100W and 120W twisted-pair and 75W coaxial cable. It simulates the frequency dependent attenuation characteristics of these lines at the lengths recommended for output pulse mask testing by both US and European standards committees. Receiver input sensitivity can also be tested through the RJ-48 connector with simulated line loss ranging from 0dB to 18dB.TR>

Max Length

(ft)

Step Size

(ft)

Accuracy

(ft)

0

655

131

± 30