Leader 408NPS NTSC/PAL/SECAM Pattern Generator
Microprocessor
control and digital synthesis give the 408NPS extreme flexibility in
test signal programming of both video and RF outputs. Signals available
simultaneously include composite video, Y/C, Y/R-Y/B-Y, GBR, full sync
generator outputs, audio test tones (400 Hz and 1 kHz) and modulated
output from 30 to 900 MHz. Multiple test patterns include wide and
narrow video sweeps and multiburst with last burst variable to 15 MHz.
Signal modifiers include polarity inversion, superimposed circle and
moving marker as well as on/off and level control of burst, sync, setup,
luminance, chroma, R, B and G. Genlock and remote control are standard.
GPIB is available as an option. The 408NPS operates in the NTSC system
and extends all operating features into PAL and SECAM as well.
Applicable video and audio modulation is selected by system designation.
The FUNCTION DATA block provides easy access to all programming
functions. Here, up to 100 test setups can be stored, each one holding
front panel settings (pattern selected, genlock on/off, signal
modifiers, etc.), tailored or standard video parameters. RF channel
selected or tailored to any carrier frequency between 30 and 900 MHz.
Program control over video parameters allow component values for Betacam
or MII to be set up. The LCD panel shows partial programming menus, but
the full menus may be superimposed on the selected pattern on a monitor
screen.
- NTSC M
- PAL-B, C, D, G, H, I, K and L
- SECAM III-B, D, G, H, K and L
- Composite, RGB, Y/R-Y/B-Y, Y/C
- VHF/UHF/Cable R-F Coverage
- Programmable Parameters
- 100 Program Storage
- 15 MHz Sweep and Multiburst
- VHF/UHF Modulator Accepts Internal and External Video and Audio
Instruction Manual (QR Link)
Power Cord
