The PLZ-4W Series Electronic Load unit is a multifunctional system designed to offer the highest levels of reliability and safety with operation function of constant voltage, constant current, constant power and constant resistance mode. And its control unit comes with GPIB, RS232C and USB as standard equipment, available in 5 models. A 0(Zero)V input operating voltage is available in 2 models (PLZ164WA, PLZ664WA) which are suitable to meet the testing demands for the Fuel Cell, DC/DC converter, SW Power Supply, and any other devices required for the lower operating voltage application. Model PLZ664WA offers the 132A at 0V input as a largest current rating in its class. ( 33A for model PLZ164WA) Furthermore, the PLZ-4W features high speed slew rate when switching, it can be used as simulating load for the characteristic, performance, life cycle, aging test in the field of application in Automobile electronics, SW Power Supply manufacturer, Secondary Battery. To achieve large capacity for testing application at low cost, PLZ1004W can be expanded up to 9kW by using its 2kW booster unit (PLZ2004WB).
Features
High-speed response and variable slew-rate With PLZ-4W series, a faster response of rise/fall time as calculated conversion value with 10 µs is made possible, enabling a transient response test for the direct current and accurate reproduction of a simulation waveform as a dummy load. In addition, it also can be set with a slew rate (A/µs ). As for the setting value, it can be varied continuously, and be possible to optimize transient control for voltage drops due to wiring inductance, constant-voltage power supply, etc., when the load current is switched on.
0(Zero)V input The 164WA and 664WA of PLZ-4W series permit a load input up to the rated current even when the Input Voltage is set for 0(Zero)V.
Sequence function Sequence patterns set as you requested can be saved in the built-in memory. In the sequence program, 10 normal sequences and 1 first sequence can be saved. 256 steps of normal sequences, and 1024 steps of the first sequence can be saved in each program.
Convenient function for discharging test of cells The PLZ4W can measure the time from load-on to load-off. When combined with under voltage protection (UVP) function, the time from when the battery discharge is started until the battery voltage falls to the cutoff voltage can be measured. Also, you can set the timer so it will load-off automatically after a specified time elapses from load-on mode. Once this timer is set, the input voltage value immediately before load-off is displayed, so it is possible to measure the closed circuit voltage after a specified time elapses from the start of discharging battery.
Booster unit PLZ2004WB To achieve a large capacity system at low cost, the PLZ1004W has an expandable option PLZ2004WB as a booster unit. Using 1 PLZ1004W as a master unit, a maximum of 4 booster units can be parallel connected. (Max. 9kW, 1800A) Note: PLZ2004WB(Booster unit) can be used for the PLZ1004W only. It cannot be connected and used with any other model.
Parallel operation Under parallel operation, the same model can be parallel connected to a maximum of 5 units when booster unit is not used. (Max. 5kW, 1000A)
Various Functions The PLZ-4W Series has equipped with all the same functions of its former type of the PLZ-3W Series, such as the Soft-start Function, Lock Function, Short Function, ABC Memory Function, Set-up Memory Function, Switching Functions, etc.
GPIB, RS-232C, USB as standard equipment
Large-Capacity DC Electronic Load System The PLZ-4W SR/LP Series offers wide range of the "Large-Capacity DC Electronic Load System" that consists of the conventional electronic load model PLZ1004W and PLZ2004WB applying to the large current (maximum 2600 A) installed in the exclusive rack mount system. *Refer to data sheet(pdf) for details
Operation Manual Power Cord LOAD Hardware (installed) Input Cover with Zip Ties Protection Plug (Qty 2)
Your request to be notified when this product is back in stock has been sent to our sales department.
We will notify you as soon as this item is available for purchase.
Thank you for allowing us the opportunity to assist with your test equipment needs. We hope to earn your business.
Error Sending Request
We are very sorry but an error on the server is preventing your request from being processed.
Please contact us via email or toll free at (800) 673-4102 and we will be
happy to assist you with this request.
We would also greatly appreciate it if you could provide us with this error code:
999
Unable to Process Request
Your offer was received but we are unable to process it for the following reason: ???
Please correct the issue indicated and resubmit or contact us via email or toll free
at (800) 673-4102 and we will be happy to assist you with this request.
Offer
AccuSource Electronics is always happy to consider reasonable offers on our test instruments.
Please enter your offer below for consideration.
Kikusui PLZ1004W
$.00
Contact Info
Requirements
Our normal service includes 90 day warranty, all standard accessories and manuals, and restoration to
"nearly new" condition. Discounts may be offered for reduced service levels. Please let us know which of
these you would be willing to consider for the price discount.
Reduced Warranty Period:
Do you require manuals and accessories for the instrument?
Will you accept an instrument with minor cosmetic and physical flaws if it operates properly?
Are you willing to prepay your order by check or wire transfer to avoid credit card fees?
Additional Info
Equipment Offer Sent
Your offer has been sent to our sales department for review. You should expect a response within
one business day or less.
Thank you for allowing us the opportunity to assist with your test equipment needs. We hope to earn your business.
Error Sending Request
We are very sorry but an error on the server is preventing your request from being processed.
Please contact us via email or toll free at (800) 673-4102 and we will be
happy to assist you with this request.
We would also greatly appreciate it if you could provide us with this error code:
999
Unable to Process Offer
Your offer was received but we are unable to process it for the following reason: ???
Please correct the issue indicated and resubmit or contact us via email or toll free
at (800) 673-4102 and we will be happy to assist you with this request.
Shipping Calculator
Please provide the requested information to receive an estimated shipping cost.
In