The Agilent 1141A is a 1X FET differential probe with 200 MHz bandwidth and 3000:1 CMRR (Common Mode Rejection Ratio) at 1 MHz. The probe has an input resistance of 1 MΩ and low input capacitance of 7 pF, to minimize circuit loading.
The Agilent 1141A 200 MHz Differential Probe must be used with the Agilent 1142A Probe Control and Power Module, which controls input coupling modes: dc, dc with variable offset, and dc reject. It can be connected to any instrument with 50 ohm inputs. An external 50 ohm termination can also be used with high impedance inputs.
Compatible with 5000, 6000, and 7000 Series oscilloscopes (maximum number of probes supported by these series is 4)
Bandwidth: 200 MHz
Risetime (calculated): 1.75 ns
Attenuation ratio: 10:1 amd 100:1 with attenuator
High CMRR: 3000:1 at 1 MHz, 10:1 at 100 MHz
Superior tolerance to ESD
Low dc thermal drift
±200 V (dc + peak ac) maximum allowable input without attenuators
Input impedance: Between inputs: 1 MΩ, 7 pF
Dc offset and dc reject
Remote control input coupling and offset
Operation Manual (QR Link) Service Manual (QR Link) Differential Probe 10x Attenuator Adapter 100x Attenuator Adapter AC Coupling Adapter Two-Inch Extension Lead (5 Pack) Mini Grabber (Qty 2) Five-inch Ground Lead Shielded Signal Lead Test Board Flat-blade Alignment Tool Circuit Connection Post (Strip of 20) Carry Case
Your request to be notified when this product is back in stock has been sent to our sales department.
We will notify you as soon as this item is available for purchase.
Thank you for allowing us the opportunity to assist with your test equipment needs. We hope to earn your business.
Error Sending Request
We are very sorry but an error on the server is preventing your request from being processed.
Please contact us via email or toll free at (800) 673-4102 and we will be
happy to assist you with this request.
We would also greatly appreciate it if you could provide us with this error code:
999
Unable to Process Request
Your offer was received but we are unable to process it for the following reason: ???
Please correct the issue indicated and resubmit or contact us via email or toll free
at (800) 673-4102 and we will be happy to assist you with this request.
Offer
AccuSource Electronics is always happy to consider reasonable offers on our test instruments.
Please enter your offer below for consideration.
HP / Agilent 1141A
$.00
Contact Info
Requirements
Our normal service includes 90 day warranty, all standard accessories and manuals, and restoration to
"nearly new" condition. Discounts may be offered for reduced service levels. Please let us know which of
these you would be willing to consider for the price discount.
Reduced Warranty Period:
Do you require manuals and accessories for the instrument?
Will you accept an instrument with minor cosmetic and physical flaws if it operates properly?
Are you willing to prepay your order by check or wire transfer to avoid credit card fees?
Additional Info
Equipment Offer Sent
Your offer has been sent to our sales department for review. You should expect a response within
one business day or less.
Thank you for allowing us the opportunity to assist with your test equipment needs. We hope to earn your business.
Error Sending Request
We are very sorry but an error on the server is preventing your request from being processed.
Please contact us via email or toll free at (800) 673-4102 and we will be
happy to assist you with this request.
We would also greatly appreciate it if you could provide us with this error code:
999
Unable to Process Offer
Your offer was received but we are unable to process it for the following reason: ???
Please correct the issue indicated and resubmit or contact us via email or toll free
at (800) 673-4102 and we will be happy to assist you with this request.
Shipping Calculator
Please provide the requested information to receive an estimated shipping cost.
