Call Us : (800) 673-4102
If your fiber testing requirements have grown to include documentation and report generation, choose the FTK200. Measure optical power and loss at 850, 1300, 1310 and 1550 nm.
The FM150 meter measures power loss of multimode or singlemode fibers. It also measures output power from optical sources such as network interface cards and optical test equipment. Power is displayed in dBm, loss in dB and output power in dBm or ìW. Loss readings are compared to the stored reference level. The meter operates for up to 30 hours on a single 9-V battery. Automatic power-down feature turns the meter off if no keys are pressed for five minutes. Meter automatically stores up to 500 measurements per wavelength. Serial port lets you print measurements on a serial printer or upload them to a PC. Data-LINK
¿ software uploads results to a PC to view measurements, add header information to create reports, save and print reports. Capture data from meter for power stability tests. Single port for both output wavelengths eliminates the need to disconnect fibers to test two wavelengths.Fluke FS150 Fiber Source provides light for multimode testing at 850 nm and 1300 nm. It features a slide switch to select output and one ST connector for either output. Includes FM150 Fiber Meter, ST adapter cap with dust cap for meter, FS150 Fiber Source and dust cap, ST adapter cap with dust cap for source, two ST/ST 3-foot 62.5-ìm multimode patch cords, ST/ST 1-foot 62.5-ìm multimode test jumper, ST/ST adapter (singlemode quality), Data-LINK PC utility diskette, PR-232 PC interface cable, two recording pads and hard case.
Fluke FTK-200