The Model 8100 Transconductance Amplifier is a precision, high stability, high accuracy instrument which produces an output current which is directly proportional to the input voltage over the frequency range from dc to 100kHz. Six overlapping ranges, with full scale values of 2mA, 20mA, 0.2A, 2A, 20A and 100A, provide low distortion output currents from 200uA to 100A. With the exception of the 100A range, for which a 1 V rms input produces the 100 Arms output current, the transconductance of the other ranges is set such that a 2Vrms input produces the full scale output current. With the exception of the 100A range, all of the other ranges may be operated to twice their full scale value without any deterioration in performance.
Highly Accurate
7 Volt Compliance
100 Amperes to 100 kHz
200 mA to 100A in six ranges
100% over range capability
40ppm short term stability
0.04% dc and 0.10% ac accuracy
Accuracy independent of load
Distortion below -60dB
Complete Front Panel Calibration
IEEE-488.2 Interface standard
Stable with inductive loads
High output impedance
Power Factor corrected supplies (PF>0.98 at 100A output)
Please contact our sales department for more information.
Your request to be notified when this product is back in stock has been sent to our sales department.
We will notify you as soon as this item is available for purchase.
Thank you for allowing us the opportunity to assist with your test equipment needs. We hope to earn your business.
Error Sending Request
We are very sorry but an error on the server is preventing your request from being processed.
Please contact us via email or toll free at (800) 673-4102 and we will be
happy to assist you with this request.
We would also greatly appreciate it if you could provide us with this error code:
999
Unable to Process Request
Your offer was received but we are unable to process it for the following reason: ???
Please correct the issue indicated and resubmit or contact us via email or toll free
at (800) 673-4102 and we will be happy to assist you with this request.
Offer
AccuSource Electronics is always happy to consider reasonable offers on our test instruments.
Please enter your offer below for consideration.
Clarke Hess 8100
$.00
Contact Info
Requirements
Our normal service includes 90 day warranty, all standard accessories and manuals, and restoration to
"nearly new" condition. Discounts may be offered for reduced service levels. Please let us know which of
these you would be willing to consider for the price discount.
Reduced Warranty Period:
Do you require manuals and accessories for the instrument?
Will you accept an instrument with minor cosmetic and physical flaws if it operates properly?
Are you willing to prepay your order by check or wire transfer to avoid credit card fees?
Additional Info
Equipment Offer Sent
Your offer has been sent to our sales department for review. You should expect a response within
one business day or less.
Thank you for allowing us the opportunity to assist with your test equipment needs. We hope to earn your business.
Error Sending Request
We are very sorry but an error on the server is preventing your request from being processed.
Please contact us via email or toll free at (800) 673-4102 and we will be
happy to assist you with this request.
We would also greatly appreciate it if you could provide us with this error code:
999
Unable to Process Offer
Your offer was received but we are unable to process it for the following reason: ???
Please correct the issue indicated and resubmit or contact us via email or toll free
at (800) 673-4102 and we will be happy to assist you with this request.
Shipping Calculator
Please provide the requested information to receive an estimated shipping cost.
In